300

450

 500

• Customized exclusively for inverters

• Suited for frequent and long powercuts

• Quick recharge

• Dry charged plates for   quick initial charge

• Expected life - 2 years plus - under arduous conditions

• Easy maintenance

• No need to add up the water

• Customized exclusively for inverters

• Suited for frequent and long powercuts

• Quick recharge

• Dry charged plates for   quick initial charge

• Expected life - 2 years plus - under arduous conditions

• Maintenance free

300

400

500 & 500+

• A Red Tubular

• 24 Months Guarantee

• Less Topping Up

• Easy maintenance

• Deep Cycle Design

550

650

800

• 3rd Generation tubular technology

• Low maintenance along with flooded design

• Deep cycle design

• Abuse resistant

• Tower type design

• Common Side Venting

• Very  long life

• Once in a year topping-up

• Suited for use in areas of frequent power cut (800 to 1000) cycles of deep discharge as against 400 cycles of other batteries

• Can withstand overcharge batter

• occupies less floor space, Totally new look

• Less pollution, Environment Friendly

• Spines cast with Torr Tubular technology in HADI machine at 100 bar.

• PE pocket type sepration

• Resistance to corrosion and high ambient temprature.

• Very long life - Suitable for frequent and long power cuts (800 to 1000 cycles of deep discharge) with quick recharge adaptability.

• Low Maintenance characterstics with high acid per volume ampere-hour.

• Substantial savings in floor area.

 &

EL Tubular+

 5 yr Warranty

• Long life: 5-7 yr even on regular deep cycling

• Tubular positive plates

• Heavy duty terminals with insulating shrouds

• Microporous ceramic vent plugs

• Short first charge - ready to use in 12 hours

• Clean environment - free from acid fumes

• Abuse resistant

• Topping-up frequency-once in 4-6 months

• Available in wide range from 40AH-150AH

• APPLICATIONS:
  UPS Systems, Domestic Inverters; Epabx; Alarm Systems Emergency Lighting; Switchgear Operations in Substations; Solar P.V & Wind Power; Genset Starting Operations.
  Models: 12 Volt(Polypropylene)40AH, 12v66,12v75, 12v100, 12v130, 12v150.

• Sealed maintenance free

• Free from orientation constraints

• Eco-friendly

• Easy handling & no installation constraints

• Ready-to-use

• Long service life

• Low self discharge

• Excellent charge retention & recovery ability

• Superior high-rate discharge

• High reliability

• Available in wide range from 4AH - 5000AH

• APPLICATIONS:
  UPS Systems, Telecommunication Equipments, Solar Lanterns & Emergency Lights, Railway Applications.
  MODELS: EP 6V4, 12V7, 12V15, 12V17, 12V26, 12V42, 12v65, 12v7, 12v100, 12v120

Powerful traction battery 
The tubular powerful traction battery with high capacity can handle a full work shift after 8 hours charge and has a 5 year lift time when normally operated and maintained.

PLANTE

Exide Plante is most suited for Power Plant application. It is corroborated by BS6290. The discharge charge characteristics do not vary throughout life and the voltage characteristics on discharge, float or recharge are stable and reproducible. While there is no reliable test to confirm the service endurance of the product, experience has shown that under well maintained float conditions a product life of upto 25 Years can be expected.

APPLICATIONS: Electrical performance characteristics determine the applications to which a high performance Plante cell is most suited. The high performance plante cell is particularly recommended for power systems associated with telecommunications, switch operation, standby engine starting, uninterruptible power supplies and emergency lighting.